Cpu And Ram Upgrade

mainframe computer and RAM Upgrade Things to have in the lead starting: * Phillips foreland in time screwdriver * 3 anti-static bags * 2 Sticks of Kingston KVR DDR400 ram 512Mb * 1 Intel Pentium 4 2.6 Northwood mainframe * Anti Static Wrist thresh * Thermal paste crystallize positive(predicate) before starting to have the anti static whisk grounded. Checking Computer status * Power up the computer. * When causationing, the initial office staff screen should show the following information: * Intel Pentium 4 central processing unit 2.60GHZ * 640MB DDR memory * BIOS decree 8.00.12 * After this information has been posted, properly debar the computer down, consequently unplug the power cable from the covering fire to ensure that on that point is no power going into the system. * Once the power is unplugged, send the computer on its stead, motherboard lieu closest to the desk. * Remove the look panel to volunteer access to the motherboard. Removing old central processor: * disconnect CPU lover from the motherboard. * Gently pull the face cloth latches on the CPU fan up to a 90 percentage point angle with the board, careful not to break them. * Once the white-hot latches have been lifted, gently lift the CPU fan and heatsink up, guardedly pulling the prongs holding it the the base outward to release the catches.

* At this point, once the heatsink and fan have been lifted up and band to the side, the CPU should be exposed, and you can proceed to removing the CPU. * On the side of the CPU closest to the North Bridge! , you will see a metal latch. Gently pull this latch up to a 90 degree angle to the motherboard. This should loosen the CPU for removal. * At this point, gently pull out CPU and place into an anti-static bag. CPU Installation: * Get new CPU box. It should be an Intel pentium 4 2.60GHz CPU, socket 478. * Place new CPU into its slot on the motherboard, paying attention to the keyed area. The processor should simply drop screening into the slot. * Once the is done, push the metal latch back into position. It should be...If you creator to get a full essay, order it on our website: BestEssayCheap.com

If you want to get a full essay, visit our page: cheap essay